Westminster Electrician GuideIndependent homeowner guide · Westminster, Colorado

How to check an electrician in Westminster, CO

Two agencies keep records on electrical work in Westminster: the Colorado State Electrical Board and the City's Building Division. A few minutes with both tells you more than any website, including this one.

Updated November 18, 2026 · Researched from City of Westminster, Colorado DORA and utility sources

On this page
  1. 1. Look the person and the company up with the state
  2. 2. Ask whether the company is registered with the City
  3. 3. Make sure the permit is in the contractor's name
  4. 4. Ask for insurance in writing
  5. 5. Get the quote to describe the permit
  6. Red flags
  7. If you plan to do the work yourself
  8. Frequently asked questions

1. Look the person and the company up with the state

Colorado's State Electrical Board, part of the Department of Regulatory Agencies (DORA), credentials individual electricians and registers electrical contractor companies. (DORA, State Electrical Board) Use DORA's free Verify a License search for both:

  • The electrician who will be responsible for the work. Ask for the name exactly as it appears on the state credential.
  • The company. Under the Board's rules, a registered electrical contractor may not advertise "by any name, including DBAs, other than the registered company name on record" with DORA. (3 CCR 710-1) If the name on an ad, truck or invoice does not match a DORA record, ask why.

Check that each record is active and note its expiration date. If something goes wrong, DORA's Division of Professions and Occupations takes complaints through its File a Complaint page.

2. Ask whether the company is registered with the City

Westminster runs its own contractor registration. Its contractor license application has an electrical contractor category that costs nothing, but requires copies of two state credentials: the responsible electrician's top-level state license and the company's state electrical contractor license. (City application; Ordinance 4284) The City's Resources page says that if you hire a contractor, "they must be signed on to the permit." (City Resources)

3. Make sure the permit is in the contractor's name

The state is explicit that a contractor must pull its own permits, and that work "must not be done using a 'homeowner' issued permit or permit issued to another company." (DORA permit information) In Westminster, permits are applied for through eTRAKiT, and the City says the portal lets anyone view records and check project status without logging in. (City, Apply for a Permit) Once the permit is issued, look it up by address and confirm the contractor shown is the company you hired.

4. Ask for insurance in writing

The City's proposed licensing update summarizes the insurance it expects of contractors: workers' compensation under Colorado statute and general liability of $1,000,000 per occurrence and $2,000,000 aggregate. (Proposed update summary) That document was still labeled "proposed" in November 2026, so treat the figures as a reasonable benchmark, and ask for a certificate naming your address.

5. Get the quote to describe the permit

A written quote should say whether the permit fee is included and who schedules inspections. Westminster prices permits from the project valuation, so a quote that lists the job's total value also lets you sanity-check the fee using our permit fee walk-through.

Red flags

  • A company name that differs from the DORA record, or no record at all
  • A request that you, the homeowner, pull the permit for work someone else will do (the state's homeowner permit is only for work the homeowner personally performs)
  • No written quote, or a quote that leaves out the permit
  • Pressure to start before the permit is issued

If you plan to do the work yourself

Colorado lets a homeowner do electrical work on their own residence if they personally perform it, the property is not for sale, resale or rent and not generally open to the public, the work is inspected before it is covered and again on completion, and it complies with the National Electrical Code. (DORA permit information) Westminster's Resources page also says homeowners living in the home can do the work and apply for the permits. (City Resources)

Frequently asked questions

How do I verify a Colorado electrician?

Search the person and the company on DORA's free Verify a License tool. Confirm both records are active and that the company name matches the name on the ad or invoice.

Does an electrical contractor need to register with the City of Westminster?

Yes. The City registers contractors, and its electrical contractor category is free but requires copies of the electrician's top-level state license and the company's state contractor license. Contractors must be signed on to the permit.

Can I pull the permit so my electrician saves time?

No. Colorado's homeowner permit covers work the homeowner personally performs. A contractor must obtain permits for its own work.

Where can I see a permit for my address?

In the City's eTRAKiT portal, which the City says lets the public view records and check project status without logging in.

Sources

Checked November 18, 2026.

  1. Colorado DORA, State Electrical Board
  2. Colorado DORA, Verify a License
  3. Colorado State Electrical Board Rules, 3 CCR 710-1
  4. Colorado DORA, File a Complaint
  5. City of Westminster, Contractor License Application (Oct. 9, 2025)
  6. City of Westminster, Ordinance No. 4284 (2025), contractor license classes
  7. City of Westminster, Building Resources
  8. Colorado DORA, Electrical Permit Information
  9. City of Westminster, Apply for a Permit (eTRAKiT)
  10. City of Westminster, Proposed Contractor Licensing Update (public summary)