Westminster Electrician GuideIndependent homeowner guide · Westminster, Colorado

Whole-house surge protection in Westminster, CO

A whole-house surge protector is a small job that protects everything downstream of the panel. It is worth asking about whenever an electrician is already working in your panel.

Updated November 18, 2026 · Researched from City of Westminster, Colorado DORA and utility sources

On this page
  1. Three types
  2. When surges happen
  3. The permit
  4. Published cost ranges (national)
  5. Questions to ask
  6. Frequently asked questions

Three types

Angi describes three types of surge protective devices (Angi, surge protection):

Type Where it goes National device cost
Type 1 Outside, before power reaches the main breaker $50 to $250
Type 2 At the main panel, protecting the circuits $50 to $250
Type 3 Plug-in, at individual outlets $10 to $25

Type 2 is the most common whole-home choice, according to Angi. A panel-mounted device works with, not instead of, plug-in strips for sensitive electronics.

When surges happen

Surges can come from outside, from lightning or utility switching, and from inside, when large motors cycle. Power coming back after an outage is another moment to think about. After its December 2025 Public Safety Power Shutoff, Xcel said crews must inspect and repair lines before they are re-energized. (Xcel Energy Newsroom)

The permit

Installing a device in the panel is electrical work that is not on Westminster's permit-exempt list. (§ 11-9-3) It is often added to a panel upgrade or other panel job, which keeps it on one permit and one visit.

Published cost ranges (national)

Angi's 2026 national average for whole-house surge protector installation is $300, with most homeowners paying $70 to $700, and electrician labor of about $100 to $200 for a roughly two-hour job. (Angi, surge protection)

Questions to ask

  • Type 1 or Type 2, and why?
  • Does the device have an indicator that shows when it needs replacing?
  • Can it be installed during other panel work to save a visit?

Frequently asked questions

What is a whole-house surge protector?

A device installed at or before the main panel that limits voltage spikes for every circuit in the home. Type 2 devices at the panel are the most common choice.

How much does whole-house surge protection cost?

Angi's 2026 national average is $300 installed, with most homeowners paying $70 to $700.

Sources

Checked November 18, 2026.

  1. Angi, Whole House Surge Protector Cost (national)
  2. Xcel Energy Newsroom, Public Safety Power Shutoff (Dec. 18, 2025)
  3. Westminster Municipal Code Title XI, Ch. 9, § 11-9-3 (Zoneomics compilation)